AAERTWF.main.mix
2.66 KB
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
Aileron/rudder/elevator/throttle/wheel/flaps mixer for PX4FMU
=======================================================
This file defines mixers suitable for controlling a fixed wing aircraft with
aileron, rudder, elevator, throttle and steerable wheel controls using PX4FMU.
The configuration assumes the aileron servo(s) are connected to PX4FMU servo
output 0 and 1, the elevator to output 2, the rudder to output 3, the throttle
to output 4 and the wheel to output 5.
Inputs to the mixer come from channel group 0 (vehicle attitude), channels 0
(roll), 1 (pitch), 2 (yaw) and 3 (thrust) 4 (flaps).
Aileron mixer (roll + flaperon)
---------------------------------
This mixer assumes that the aileron servos are set up correctly mechanically;
depending on the actual configuration it may be necessary to reverse the scaling
factors (to reverse the servo movement) and adjust the offset, scaling and
endpoints to suit.
M: 2
S: 0 0 10000 10000 0 -10000 10000
S: 0 6 10000 10000 0 -10000 10000
M: 2
S: 0 0 10000 10000 0 -10000 10000
S: 0 6 -10000 -10000 0 -10000 10000
Elevator mixer
------------
Two scalers total (output, roll).
This mixer assumes that the elevator servo is set up correctly mechanically;
depending on the actual configuration it may be necessary to reverse the scaling
factors (to reverse the servo movement) and adjust the offset, scaling and
endpoints to suit.
M: 1
S: 0 1 -10000 -10000 0 -10000 10000
Rudder mixer
------------
Two scalers total (output, yaw).
This mixer assumes that the rudder servo is set up correctly mechanically;
depending on the actual configuration it may be necessary to reverse the scaling
factors (to reverse the servo movement) and adjust the offset, scaling and
endpoints to suit.
M: 1
S: 0 2 10000 10000 0 -10000 10000
Motor speed mixer
-----------------
Two scalers total (output, thrust).
This mixer generates a full-range output (-1 to 1) from an input in the (0 - 1)
range. Inputs below zero are treated as zero.
M: 1
S: 0 3 0 20000 -10000 -10000 10000
Wheel mixer
------------
Two scalers total (output, yaw).
This mixer assumes that the wheel servo is set up correctly mechanically;
depending on the actual configuration it may be necessary to reverse the scaling
factors (to reverse the servo movement) and adjust the offset, scaling and
endpoints to suit.
M: 1
S: 0 2 10000 10000 0 -10000 10000
Flaps / gimbal / payload mixer for last three channels,
using the payload control group
-----------------------------------------------------
M: 1
S: 0 4 10000 10000 0 -10000 10000
M: 1
S: 2 0 10000 10000 0 -10000 10000
M: 1
S: 2 2 10000 10000 0 -10000 10000