board_config.h
10.5 KB
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
/****************************************************************************
*
* Copyright (c) 2013-2016 PX4 Development Team. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name PX4 nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/**
* @file board_config.h
*
* PX4FMUv4Pro internal definitions
*/
#pragma once
/****************************************************************************************************
* Included Files
****************************************************************************************************/
#include <px4_platform_common/px4_config.h>
#include <nuttx/compiler.h>
#include <stdint.h>
/****************************************************************************************************
* Definitions
****************************************************************************************************/
/* PX4IO connection configuration */
#define BOARD_USES_PX4IO_VERSION 2
#define PX4IO_SERIAL_DEVICE "/dev/ttyS4"
#define PX4IO_SERIAL_TX_GPIO GPIO_USART6_TX
#define PX4IO_SERIAL_RX_GPIO GPIO_USART6_RX
#define PX4IO_SERIAL_BASE STM32_USART6_BASE /* hardwired on the board */
#define PX4IO_SERIAL_VECTOR STM32_IRQ_USART6
#define PX4IO_SERIAL_TX_DMAMAP DMAMAP_USART6_TX
#define PX4IO_SERIAL_RX_DMAMAP DMAMAP_USART6_RX
#define PX4IO_SERIAL_RCC_REG STM32_RCC_APB2ENR
#define PX4IO_SERIAL_RCC_EN RCC_APB2ENR_USART6EN
#define PX4IO_SERIAL_CLOCK STM32_PCLK2_FREQUENCY
#define PX4IO_SERIAL_BITRATE 1500000 /* 1.5Mbps -> max rate for IO */
/* Configuration ************************************************************************************/
//{GPIO_RSSI_IN, 0, 0}, - pio Analog used as PWM
//{0, GPIO_LED_SAFETY, 0}, pio replacement
//{GPIO_SAFETY_SWITCH_IN, 0, 0}, pio replacement
//{0, GPIO_PERIPH_3V3_EN, 0}, Owned by the 8266 driver
//{0, GPIO_SBUS_INV, 0}, https://github.com/PX4/Firmware/blob/master/src/modules/px4iofirmware/sbus.c
//{GPIO_8266_GPIO0, 0, 0}, Owned by the 8266 driver
//{0, GPIO_SPEKTRUM_PWR_EN, 0}, Owned Spektum driver input to auto pilot
//{0, GPIO_8266_PD, 0}, Owned by the 8266 driver
//{0, GPIO_8266_RST, 0}, Owned by the 8266 driver
/* PX4FMU GPIOs ***********************************************************************************/
/* LEDs */
#define GPIO_LED1 (GPIO_OUTPUT|GPIO_OPENDRAIN|GPIO_SPEED_50MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTB|GPIO_PIN11)
#define GPIO_LED2 (GPIO_OUTPUT|GPIO_OPENDRAIN|GPIO_SPEED_50MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTB|GPIO_PIN1)
#define GPIO_LED3 (GPIO_OUTPUT|GPIO_OPENDRAIN|GPIO_SPEED_50MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTB|GPIO_PIN3)
#define GPIO_LED_RED GPIO_LED1
#define GPIO_LED_GREEN GPIO_LED2
#define GPIO_LED_BLUE GPIO_LED3
#define BOARD_HAS_CONTROL_STATUS_LEDS 1
#define BOARD_OVERLOAD_LED LED_RED
#define BOARD_ARMED_LED LED_BLUE
#define BOARD_ARMED_STATE_LED LED_GREEN
/* SPI */
#define GPIO_SPI_CS_TEMPCAL_EEPROM (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_SET|GPIO_PORTH|GPIO_PIN5)
/*
* ADC channels
*
* These are the channel numbers of the ADCs of the microcontroller that can be used by the Px4 Firmware in the adc driver
*/
// ADC defines to be used in sensors.cpp to read from a particular channel
#define ADC_BATTERY1_VOLTAGE_CHANNEL 2 // PA2
#define ADC_BATTERY1_CURRENT_CHANNEL 3 // PA3
#define ADC_5V_RAIL_SENSE 4 // PA4
#define ADC_BATTERY2_VOLTAGE_CHANNEL 11 // PC1
#define ADC_BATTERY2_CURRENT_CHANNEL 13 // PC3
#define ADC_CHANNELS (1 << ADC_BATTERY1_VOLTAGE_CHANNEL) | (1 << ADC_BATTERY1_CURRENT_CHANNEL) | \
(1 << ADC_5V_RAIL_SENSE) | \
(1 << ADC_BATTERY2_VOLTAGE_CHANNEL) | (1 << ADC_BATTERY2_CURRENT_CHANNEL)
/* Define Battery 1 Voltage Divider and A per V
*/
#define BOARD_BATTERY1_V_DIV (6.490196078f)
#define BOARD_BATTERY1_A_PER_V (26.4f)
/* Define Battery 2 Voltage Divider and A per V
*/
#define BOARD_BATTERY2_V_DIV (6.490196078f)
#define BOARD_BATTERY2_A_PER_V (26.4f)
/* Define LTC4417 UV set by resistors on the board that are different than FMUv2 3.7V */
#define BOARD_VALID_UV (4.01f)
/* Power supply control and monitoring GPIOs */
#define GPIO_nVDD_BRICK1_VALID (GPIO_INPUT|GPIO_PULLUP|GPIO_PORTB|GPIO_PIN5)
#define GPIO_nVDD_BRICK2_VALID (GPIO_INPUT|GPIO_PULLUP|GPIO_PORTG|GPIO_PIN5)
#define BOARD_NUMBER_BRICKS 2
#define GPIO_nVDD_USB_VALID (GPIO_INPUT|GPIO_PULLUP|GPIO_PORTC|GPIO_PIN0)
#define GPIO_VDD_3V3_PERIPH_EN (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_SET|GPIO_PORTC|GPIO_PIN5)
#define GPIO_VDD_5V_PERIPH_EN (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTG|GPIO_PIN10)
#define GPIO_VDD_5V_HIPOWER_EN (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTF|GPIO_PIN4)
#define GPIO_VDD_5V_PERIPH_OC (GPIO_INPUT|GPIO_FLOAT|GPIO_PORTG|GPIO_PIN4)
#define GPIO_VDD_5V_HIPOWER_OC (GPIO_INPUT|GPIO_FLOAT|GPIO_PORTF|GPIO_PIN3)
/* Tone alarm output */
#define TONE_ALARM_TIMER 2 /* timer 2 */
#define TONE_ALARM_CHANNEL 1 /* channel 1 */
#define GPIO_TONE_ALARM_IDLE (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTA|GPIO_PIN15)
#define GPIO_TONE_ALARM (GPIO_ALT|GPIO_AF1|GPIO_SPEED_2MHz|GPIO_PUSHPULL|GPIO_PORTA|GPIO_PIN15)
/* PWM
*/
#define DIRECT_PWM_OUTPUT_CHANNELS 6
#define DIRECT_INPUT_TIMER_CHANNELS 6
/* USB OTG FS
*
* PA9 OTG_FS_VBUS VBUS sensing
*/
#define GPIO_OTGFS_VBUS (GPIO_INPUT|GPIO_FLOAT|GPIO_SPEED_100MHz|GPIO_OPENDRAIN|GPIO_PORTA|GPIO_PIN9)
/* High-resolution timer */
#define HRT_TIMER 3 /* use timer 3 for the HRT */
#define HRT_TIMER_CHANNEL 4 /* use capture/compare channel 4 */
#define HRT_PPM_CHANNEL 3 /* use capture/compare channel 3 */
#define GPIO_PPM_IN (GPIO_ALT|GPIO_AF2|GPIO_PULLUP|GPIO_PORTB|GPIO_PIN0)
/* PWM input driver. Use FMU AUX5 pins attached to timer4 channel 2 */
#define PWMIN_TIMER 4
#define PWMIN_TIMER_CHANNEL 2
#define GPIO_PWM_IN GPIO_TIM4_CH2IN_2
/* N.B. By the virtue of not being named GPIO_BTN_SAFETY, this pin is
* initialized but not used (compiled for) in the FMU module
*/
#define GPIO_BTN_SAFETY_FMU (GPIO_INPUT|GPIO_FLOAT|GPIO_PORTC|GPIO_PIN4)
#define GPIO_SBUS_INV (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_SET|GPIO_PORTC|GPIO_PIN13)
#define GPIO_8266_GPIO0 (GPIO_INPUT|GPIO_PULLUP|GPIO_PORTE|GPIO_PIN2)
//TODO: fo not see on schematic #define GPIO_SPEKTRUM_PWR_EN (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTE|GPIO_PIN4)
#define GPIO_8266_PD (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_SET|GPIO_PORTE|GPIO_PIN5)
#define GPIO_8266_RST (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_SET|GPIO_PORTE|GPIO_PIN6)
/* No Power switch controls or binding control *********************************************
* V4 Pro does not have control to bind SPEKTRUM - there is only 5V VCC on
* the connector interface and Spektrum requires VDD 3v3 to be controllable
*/
/* By Providing BOARD_ADC_USB_CONNECTED (using the px4_arch abstraction)
* this board support the ADC system_power interface, and therefore
* provides the true logic GPIO BOARD_ADC_xxxx macros.
*/
#define BOARD_ADC_USB_CONNECTED (px4_arch_gpioread(GPIO_OTGFS_VBUS))
#define BOARD_ADC_BRICK1_VALID (!px4_arch_gpioread(GPIO_nVDD_BRICK1_VALID))
#define BOARD_ADC_BRICK2_VALID (!px4_arch_gpioread(GPIO_nVDD_BRICK2_VALID))
#define BOARD_ADC_USB_VALID (!px4_arch_gpioread(GPIO_nVDD_USB_VALID))
#define BOARD_ADC_SERVO_VALID (1)
#define BOARD_ADC_PERIPH_5V_OC (!px4_arch_gpioread(GPIO_VDD_5V_PERIPH_OC))
#define BOARD_ADC_HIPOWER_5V_OC (!px4_arch_gpioread(GPIO_VDD_5V_HIPOWER_OC))
#define BOARD_HAS_PWM DIRECT_PWM_OUTPUT_CHANNELS
/* This board provides a DMA pool and APIs */
#define BOARD_DMA_ALLOC_POOL_SIZE 5120
#define BOARD_HAS_ON_RESET 1
#define BOARD_HAS_STATIC_MANIFEST 1
__BEGIN_DECLS
/****************************************************************************************************
* Public Types
****************************************************************************************************/
/****************************************************************************************************
* Public data
****************************************************************************************************/
#ifndef __ASSEMBLY__
/****************************************************************************************************
* Public Functions
****************************************************************************************************/
/****************************************************************************************************
* Name: stm32_spiinitialize
*
* Description:
* Called to configure SPI chip select GPIO pins for the PX4FMU board.
*
****************************************************************************************************/
extern void stm32_spiinitialize(void);
extern void stm32_usbinitialize(void);
extern void board_peripheral_reset(int ms);
#include <px4_platform_common/board_common.h>
#endif /* __ASSEMBLY__ */
__END_DECLS