mixer.cpp 20.6 KB
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435 436 437 438 439 440 441 442 443 444 445 446 447 448 449 450 451 452 453 454 455 456 457 458 459 460 461 462 463 464 465 466 467 468 469 470 471 472 473 474 475 476 477 478 479 480 481 482 483 484 485 486 487 488 489 490 491 492 493 494 495 496 497 498 499 500 501 502 503 504 505 506 507 508 509 510 511 512 513 514 515 516 517 518 519 520 521 522 523 524 525 526 527 528 529 530 531 532 533 534 535 536 537 538 539 540 541 542 543 544 545 546 547 548 549 550 551 552 553 554 555 556 557 558 559 560 561 562 563 564 565 566 567 568 569 570 571 572 573 574 575 576 577 578 579 580 581 582 583 584 585 586 587 588 589 590 591 592 593 594 595 596 597 598 599 600 601 602 603 604 605 606 607 608 609 610 611 612 613 614 615 616 617 618 619 620 621 622 623 624 625 626 627 628 629 630 631 632 633 634 635 636 637 638 639 640 641 642 643 644 645 646 647 648 649 650 651 652 653 654 655 656 657 658 659 660 661 662 663 664 665 666 667 668 669 670 671 672 673 674 675 676 677 678 679 680 681 682 683 684 685 686 687 688
/****************************************************************************
 *
 *   Copyright (c) 2012-2017 PX4 Development Team. All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 *
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in
 *    the documentation and/or other materials provided with the
 *    distribution.
 * 3. Neither the name PX4 nor the names of its contributors may be
 *    used to endorse or promote products derived from this software
 *    without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
 * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
 * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
 * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
 * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
 * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
 * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
 * POSSIBILITY OF SUCH DAMAGE.
 *
 ****************************************************************************/

/**
 * @file mixer.cpp
 *
 * Control channel input/output mixer and failsafe.
 *
 * @author Lorenz Meier <lorenz@px4.io>
 */

#include <px4_platform_common/px4_config.h>
#include <syslog.h>

#include <sys/types.h>
#include <stdbool.h>
#include <float.h>
#include <string.h>
#include <math.h>

#include <drivers/drv_pwm_output.h>
#include <drivers/drv_hrt.h>

#include <lib/mixer/MixerGroup.hpp>
#include <output_limit/output_limit.h>
#include <rc/sbus.h>

#include <uORB/topics/actuator_controls.h>

#include "mixer.h"

extern "C" {
	/* #define DEBUG */
#include "px4io.h"
}

/*
 * Maximum interval in us before FMU signal is considered lost
 */
#define FMU_INPUT_DROP_LIMIT_US		500000

/* current servo arm/disarm state */
static volatile bool mixer_servos_armed = false;
static volatile bool should_arm = false;
static volatile bool should_arm_nothrottle = false;
static volatile bool should_always_enable_pwm = false;
static volatile bool in_mixer = false;

static bool new_fmu_data = false;
static uint64_t last_fmu_update = 0;

extern int _sbus_fd;

/* selected control values and count for mixing */
enum mixer_source {
	MIX_NONE,
	MIX_DISARMED,
	MIX_FMU,
	MIX_OVERRIDE,
	MIX_FAILSAFE,
	MIX_OVERRIDE_FMU_OK
};

static volatile mixer_source source;

static int mixer_callback(uintptr_t handle, uint8_t control_group, uint8_t control_index, float &control);
static int mixer_mix_threadsafe(float *outputs, volatile uint16_t *limits);

static MixerGroup mixer_group;

int mixer_mix_threadsafe(float *outputs, volatile uint16_t *limits)
{
	/* poor mans mutex */
	if ((r_status_flags & PX4IO_P_STATUS_FLAGS_MIXER_OK) == 0) {
		return 0;
	}

	in_mixer = true;
	int mixcount = mixer_group.mix(&outputs[0], PX4IO_SERVO_COUNT);
	*limits = mixer_group.get_saturation_status();
	in_mixer = false;

	return mixcount;
}

void
mixer_tick()
{
	/* check if the mixer got modified */
	mixer_handle_text_create_mixer();

	/* check that we are receiving fresh data from the FMU */
	irqstate_t irq_flags = enter_critical_section();
	const hrt_abstime fmu_data_received_time = system_state.fmu_data_received_time;
	leave_critical_section(irq_flags);

	if ((fmu_data_received_time == 0) ||
	    hrt_elapsed_time(&fmu_data_received_time) > FMU_INPUT_DROP_LIMIT_US) {

		/* too long without FMU input, time to go to failsafe */
		if (r_status_flags & PX4IO_P_STATUS_FLAGS_FMU_OK) {
			isr_debug(1, "AP RX timeout");
		}

		atomic_modify_clear(&r_status_flags, (PX4IO_P_STATUS_FLAGS_FMU_OK));
		atomic_modify_or(&r_status_alarms, PX4IO_P_STATUS_ALARMS_FMU_LOST);

	} else {
		atomic_modify_or(&r_status_flags, PX4IO_P_STATUS_FLAGS_FMU_OK);

		/* this flag is never cleared once OK */
		atomic_modify_or(&r_status_flags, PX4IO_P_STATUS_FLAGS_FMU_INITIALIZED);

		if (fmu_data_received_time > last_fmu_update) {
			new_fmu_data = true;
			last_fmu_update = fmu_data_received_time;
		}
	}

	/* default to disarmed mixing */
	source = MIX_DISARMED;

	/*
	 * Decide which set of controls we're using.
	 */

	/* Do not mix if we have raw PWM and FMU is ok. */
	if ((r_status_flags & PX4IO_P_STATUS_FLAGS_RAW_PWM) &&
	    (r_status_flags & PX4IO_P_STATUS_FLAGS_FMU_OK)) {

		if ((r_status_flags & PX4IO_P_STATUS_FLAGS_OVERRIDE) > 0) {
			/* a channel based override has been
			 * triggered, with FMU active */
			source = MIX_OVERRIDE_FMU_OK;

		} else {
			/* don't actually mix anything - copy values from r_page_direct_pwm */
			source = MIX_NONE;
			memcpy(r_page_servos, r_page_direct_pwm, sizeof(uint16_t)*PX4IO_SERVO_COUNT);
		}

	} else {

		if (!(r_status_flags & PX4IO_P_STATUS_FLAGS_OVERRIDE) &&
		    (r_status_flags & PX4IO_P_STATUS_FLAGS_FMU_OK) &&
		    (r_status_flags & PX4IO_P_STATUS_FLAGS_MIXER_OK)) {

			/* mix from FMU controls */
			source = MIX_FMU;
		}

		else if (r_status_flags & PX4IO_P_STATUS_FLAGS_OVERRIDE) {

			if (r_status_flags & PX4IO_P_STATUS_FLAGS_FMU_OK) {

				/* if allowed, mix from RC inputs directly up to available rc channels */
				source = MIX_OVERRIDE_FMU_OK;

			} else {
				/* if allowed, mix from RC inputs directly */
				source = MIX_OVERRIDE;
			}
		}
	}

	/*
	 * Decide whether the servos should be armed right now.
	 *
	 * We must be armed, and we must have a PWM source; either raw from
	 * FMU or from the mixer.
	 *
	 */
	should_arm = (
			     (r_status_flags & PX4IO_P_STATUS_FLAGS_INIT_OK)				/* IO initialised without error */
			     && (r_status_flags & PX4IO_P_STATUS_FLAGS_SAFETY_OFF)			/* and IO is armed */
			     && (
				     ((r_setup_arming & PX4IO_P_SETUP_ARMING_FMU_ARMED)		/* and FMU is armed */
				      && (r_status_flags & PX4IO_P_STATUS_FLAGS_MIXER_OK))	/* and there is valid input via or mixer */
				     || (r_status_flags & PX4IO_P_STATUS_FLAGS_RAW_PWM)		/* or direct PWM is set */
			     )
		     );

	should_arm_nothrottle = (
					(r_status_flags & PX4IO_P_STATUS_FLAGS_INIT_OK)                /* IO initialised without error */
					&& (r_status_flags & PX4IO_P_STATUS_FLAGS_SAFETY_OFF)        /* and IO is armed */
					&& (((r_setup_arming & PX4IO_P_SETUP_ARMING_FMU_PREARMED)    /* and FMU is prearmed */
					     && (r_status_flags & PX4IO_P_STATUS_FLAGS_MIXER_OK))     /* and there is valid input via or mixer */
					    || (r_status_flags & PX4IO_P_STATUS_FLAGS_RAW_PWM)        /* or direct PWM is set */
					   )
				);

	should_always_enable_pwm = (
					   (r_setup_arming & PX4IO_P_SETUP_ARMING_ALWAYS_PWM_ENABLE)
					   && (r_status_flags & PX4IO_P_STATUS_FLAGS_INIT_OK)
					   && (r_status_flags & PX4IO_P_STATUS_FLAGS_FMU_OK)
				   );

	/*
	 * Check if FMU is still alive, if not, terminate the flight
	 */
	if (REG_TO_BOOL(r_setup_flighttermination) && 			/* Flight termination is allowed */
	    (source == MIX_DISARMED) && 				/* and if we ended up not changing the default mixer */
	    should_arm && 						/* and we should be armed, so we intended to provide outputs */
	    (r_status_flags & PX4IO_P_STATUS_FLAGS_FMU_INITIALIZED)) { 	/* and FMU is initialized */
		atomic_modify_or(&r_setup_arming, PX4IO_P_SETUP_ARMING_FORCE_FAILSAFE); /* then FMU is dead -> terminate flight */
	}

	/*
	 * Check if we should force failsafe - and do it if we have to
	 */
	if (r_setup_arming & PX4IO_P_SETUP_ARMING_FORCE_FAILSAFE) {
		source = MIX_FAILSAFE;
	}

	/*
	 * Set failsafe status flag depending on mixing source
	 */
	if (source == MIX_FAILSAFE) {
		atomic_modify_or(&r_status_flags, PX4IO_P_STATUS_FLAGS_FAILSAFE);

	} else {
		atomic_modify_clear(&r_status_flags, (PX4IO_P_STATUS_FLAGS_FAILSAFE));
	}

	/*
	 * Set simple mixer trim values. If the OK flag is set the mixer is fully loaded.
	 */
	if (update_trims && r_status_flags & PX4IO_P_STATUS_FLAGS_MIXER_OK) {
		update_trims = false;
		mixer_group.set_trims(r_page_servo_control_trim, PX4IO_SERVO_COUNT);
	}

	/*
	 * Update air-mode parameter
	 */
	mixer_group.set_airmode((Mixer::Airmode)REG_TO_SIGNED(r_setup_airmode));


	/*
	 * Run the mixers.
	 */
	if (source == MIX_FAILSAFE) {

		/* copy failsafe values to the servo outputs */
		for (unsigned i = 0; i < PX4IO_SERVO_COUNT; i++) {
			r_page_servos[i] = r_page_servo_failsafe[i];

			/* safe actuators for FMU feedback */
			r_page_actuators[i] = FLOAT_TO_REG((r_page_servos[i] - 1500) / 600.0f);
		}

	} else if (source == MIX_DISARMED) {

		/* copy disarmed values to the servo outputs */
		for (unsigned i = 0; i < PX4IO_SERVO_COUNT; i++) {
			r_page_servos[i] = r_page_servo_disarmed[i];

			/* safe actuators for FMU feedback */
			r_page_actuators[i] = FLOAT_TO_REG((r_page_servos[i] - 1500) / 600.0f);
		}

	} else if (source != MIX_NONE && (r_status_flags & PX4IO_P_STATUS_FLAGS_MIXER_OK)
		   && !(r_setup_arming & PX4IO_P_SETUP_ARMING_LOCKDOWN)) {

		float	outputs[PX4IO_SERVO_COUNT];
		unsigned mixed;

		if (REG_TO_FLOAT(r_setup_slew_max) > FLT_EPSILON) {
			/*  maximum value the outputs of the multirotor mixer are allowed to change in this cycle
			 * factor 2 is needed because actuator outputs are in the range [-1,1]
			 */
			float delta_out_max = 2.0f * 1000.0f * dt / (r_page_servo_control_max[0] - r_page_servo_control_min[0]) / REG_TO_FLOAT(
						      r_setup_slew_max);
			mixer_group.set_max_delta_out_once(delta_out_max);
		}

		/*  set dt to be used in simple mixer for slew rate limiting */
		mixer_group.set_dt_once(dt);

		/* update parameter for mc thrust model if it updated */
		if (update_mc_thrust_param) {
			mixer_group.set_thrust_factor(REG_TO_FLOAT(r_setup_thr_fac));
			update_mc_thrust_param = false;
		}

		/* mix */
		mixed = mixer_mix_threadsafe(&outputs[0], &r_mixer_limits);

		/* the pwm limit call takes care of out of band errors */
		output_limit_calc(should_arm, should_arm_nothrottle, mixed, r_setup_pwm_reverse, r_page_servo_disarmed,
				  r_page_servo_control_min, r_page_servo_control_max, outputs, r_page_servos, &pwm_limit);

		/* clamp unused outputs to zero */
		for (unsigned i = mixed; i < PX4IO_SERVO_COUNT; i++) {
			r_page_servos[i] = 0;
			outputs[i] = 0.0f;
		}

		/* store normalized outputs */
		for (unsigned i = 0; i < PX4IO_SERVO_COUNT; i++) {
			r_page_actuators[i] = FLOAT_TO_REG(outputs[i]);
		}


		if (mixed  && new_fmu_data) {
			new_fmu_data = false;

			/* Trigger all timer's channels in Oneshot mode to fire
			 * the oneshots with updated values.
			 */

			up_pwm_update();
		}
	}

	/* set arming */
	bool needs_to_arm = (should_arm || should_arm_nothrottle || should_always_enable_pwm);

	/* lockdown means to send a valid pulse which disables the outputs */
	if (r_setup_arming & PX4IO_P_SETUP_ARMING_LOCKDOWN) {
		needs_to_arm = true;
	}

	if (needs_to_arm && !mixer_servos_armed) {
		/* need to arm, but not armed */
		up_pwm_servo_arm(true);
		mixer_servos_armed = true;
		atomic_modify_or(&r_status_flags, PX4IO_P_STATUS_FLAGS_OUTPUTS_ARMED);
		isr_debug(5, "> PWM enabled");

	} else if (!needs_to_arm && mixer_servos_armed) {
		/* armed but need to disarm */
		up_pwm_servo_arm(false);
		mixer_servos_armed = false;
		atomic_modify_clear(&r_status_flags, (PX4IO_P_STATUS_FLAGS_OUTPUTS_ARMED));
		isr_debug(5, "> PWM disabled");
	}

	if (mixer_servos_armed
	    && (should_arm || should_arm_nothrottle || (source == MIX_FAILSAFE))
	    && !(r_setup_arming & PX4IO_P_SETUP_ARMING_LOCKDOWN)) {
		/* update the servo outputs. */
		for (unsigned i = 0; i < PX4IO_SERVO_COUNT; i++) {
			up_pwm_servo_set(i, r_page_servos[i]);
		}

		/* set S.BUS1 or S.BUS2 outputs */

		if (r_setup_features & PX4IO_P_SETUP_FEATURES_SBUS2_OUT) {
			sbus2_output(_sbus_fd, r_page_servos, PX4IO_SERVO_COUNT);

		} else if (r_setup_features & PX4IO_P_SETUP_FEATURES_SBUS1_OUT) {
			sbus1_output(_sbus_fd, r_page_servos, PX4IO_SERVO_COUNT);
		}

	} else if (mixer_servos_armed && (should_always_enable_pwm
					  || (r_setup_arming & PX4IO_P_SETUP_ARMING_LOCKDOWN))) {
		/* set the disarmed servo outputs. */
		for (unsigned i = 0; i < PX4IO_SERVO_COUNT; i++) {
			up_pwm_servo_set(i, r_page_servo_disarmed[i]);
			/* copy values into reporting register */
			r_page_servos[i] = r_page_servo_disarmed[i];
		}

		/* set S.BUS1 or S.BUS2 outputs */
		if (r_setup_features & PX4IO_P_SETUP_FEATURES_SBUS1_OUT) {
			sbus1_output(_sbus_fd, r_page_servo_disarmed, PX4IO_SERVO_COUNT);
		}

		if (r_setup_features & PX4IO_P_SETUP_FEATURES_SBUS2_OUT) {
			sbus2_output(_sbus_fd, r_page_servo_disarmed, PX4IO_SERVO_COUNT);
		}
	}
}

static int
mixer_callback(uintptr_t handle,
	       uint8_t control_group,
	       uint8_t control_index,
	       float &control)
{
	control = 0.0f;

	if (control_group >= PX4IO_CONTROL_GROUPS) {
		return -1;
	}

	switch (source) {
	case MIX_FMU:
		if (control_index < PX4IO_CONTROL_CHANNELS && control_group < PX4IO_CONTROL_GROUPS) {
			if (r_page_controls[CONTROL_PAGE_INDEX(control_group, control_index)] == INT16_MAX) {
				//catch NAN values encoded as INT16 max for disarmed outputs
				control = NAN;

			} else {
				control = REG_TO_FLOAT(r_page_controls[CONTROL_PAGE_INDEX(control_group, control_index)]);
			}

			break;
		}

		return -1;

	case MIX_OVERRIDE:
		if (r_page_rc_input[PX4IO_P_RC_VALID] & (1 << CONTROL_PAGE_INDEX(control_group, control_index))) {
			control = REG_TO_FLOAT(r_page_rc_input[PX4IO_P_RC_BASE + control_index]);
			break;
		}

		return -1;

	case MIX_OVERRIDE_FMU_OK:

		/* FMU is ok but we are in override mode, use direct rc control for the available rc channels. The remaining channels are still controlled by the fmu */
		if (r_page_rc_input[PX4IO_P_RC_VALID] & (1 << CONTROL_PAGE_INDEX(control_group, control_index))) {
			control = REG_TO_FLOAT(r_page_rc_input[PX4IO_P_RC_BASE + control_index]);
			break;

		} else if (control_index < PX4IO_CONTROL_CHANNELS && control_group < PX4IO_CONTROL_GROUPS) {
			control = REG_TO_FLOAT(r_page_controls[CONTROL_PAGE_INDEX(control_group, control_index)]);
			break;
		}

		return -1;

	case MIX_DISARMED:
	case MIX_FAILSAFE:
	case MIX_NONE:
		control = 0.0f;
		return -1;
	}

	/* apply trim offsets for override channels */
	if (source == MIX_OVERRIDE || source == MIX_OVERRIDE_FMU_OK) {
		if (control_group == actuator_controls_s::GROUP_INDEX_ATTITUDE &&
		    control_index == actuator_controls_s::INDEX_ROLL) {
			control *= REG_TO_FLOAT(r_setup_scale_roll);
			control += REG_TO_FLOAT(r_setup_trim_roll);

		} else if (control_group == actuator_controls_s::GROUP_INDEX_ATTITUDE &&
			   control_index == actuator_controls_s::INDEX_PITCH) {
			control *= REG_TO_FLOAT(r_setup_scale_pitch);
			control += REG_TO_FLOAT(r_setup_trim_pitch);

		} else if (control_group == actuator_controls_s::GROUP_INDEX_ATTITUDE &&
			   control_index == actuator_controls_s::INDEX_YAW) {
			control *= REG_TO_FLOAT(r_setup_scale_yaw);
			control += REG_TO_FLOAT(r_setup_trim_yaw);
		}
	}

	/* limit output */
	if (control > 1.0f) {
		control = 1.0f;

	} else if (control < -1.0f) {
		control = -1.0f;
	}

	/* motor spinup phase - lock throttle to zero */
	if ((pwm_limit.state == OUTPUT_LIMIT_STATE_RAMP) || (should_arm_nothrottle && !should_arm)) {
		if ((control_group == actuator_controls_s::GROUP_INDEX_ATTITUDE ||
		     control_group == actuator_controls_s::GROUP_INDEX_ATTITUDE_ALTERNATE) &&
		    control_index == actuator_controls_s::INDEX_THROTTLE) {
			/* limit the throttle output to zero during motor spinup,
			 * as the motors cannot follow any demand yet
			 */
			control = 0.0f;
		}
	}

	/* only safety off, but not armed - set throttle as invalid */
	if (should_arm_nothrottle && !should_arm) {
		if ((control_group == actuator_controls_s::GROUP_INDEX_ATTITUDE ||
		     control_group == actuator_controls_s::GROUP_INDEX_ATTITUDE_ALTERNATE) &&
		    control_index == actuator_controls_s::INDEX_THROTTLE) {
			/* mark the throttle as invalid */
			control = NAN;
		}
	}

	return 0;
}

/*
 * XXX error handling here should be more aggressive; currently it is
 * possible to get STATUS_FLAGS_MIXER_OK set even though the mixer has
 * not loaded faithfully.
 */

static char mixer_text[PX4IO_MAX_MIXER_LENGTH];		/* large enough for one mixer */
static unsigned mixer_text_length = 0;
static bool mixer_update_pending = false;

int
mixer_handle_text_create_mixer()
{
	/* only run on update */
	if (!mixer_update_pending) {
		return 0;
	}

	/* do not allow a mixer change while safety off and FMU armed */
	if ((r_status_flags & PX4IO_P_STATUS_FLAGS_SAFETY_OFF) &&
	    (r_setup_arming & PX4IO_P_SETUP_ARMING_FMU_ARMED)) {
		return 1;
	}

	/* abort if we're in the mixer - it will be tried again in the next iteration */
	if (in_mixer) {
		return 1;
	}

	/* process the text buffer, adding new mixers as their descriptions can be parsed */
	unsigned resid = mixer_text_length;
	mixer_group.load_from_buf(mixer_callback, 0, &mixer_text[0], resid);

	/* if anything was parsed */
	if (resid != mixer_text_length) {

		isr_debug(2, "used %u", mixer_text_length - resid);

		/* copy any leftover text to the base of the buffer for re-use */
		if (resid > 0) {
			memmove(&mixer_text[0], &mixer_text[mixer_text_length - resid], resid);
			/* enforce null termination */
			mixer_text[resid] = '\0';
		}

		mixer_text_length = resid;
	}

	mixer_update_pending = false;

	return 0;
}

int
mixer_handle_text(const void *buffer, size_t length)
{
	/* do not allow a mixer change while safety off and FMU armed */
	if ((r_status_flags & PX4IO_P_STATUS_FLAGS_SAFETY_OFF) &&
	    (r_setup_arming & PX4IO_P_SETUP_ARMING_FMU_ARMED)) {
		return 1;
	}

	/* disable mixing, will be enabled once load is complete */
	atomic_modify_clear(&r_status_flags, PX4IO_P_STATUS_FLAGS_MIXER_OK);

	/* set the update flags to dirty so we reload those values after a mixer change */
	update_trims = true;
	update_mc_thrust_param = true;

	/* abort if we're in the mixer - the caller is expected to retry */
	if (in_mixer) {
		return 1;
	}

	px4io_mixdata	*msg = (px4io_mixdata *)buffer;

	isr_debug(2, "mix txt %u", length);

	if (length < sizeof(px4io_mixdata)) {
		return 0;
	}

	unsigned text_length = length - sizeof(px4io_mixdata);

	switch (msg->action) {
	case F2I_MIXER_ACTION_RESET:
		isr_debug(2, "reset");

		/* THEN actually delete it */
		mixer_group.reset();
		mixer_text_length = 0;

	/* FALLTHROUGH */
	case F2I_MIXER_ACTION_APPEND:
		isr_debug(2, "append %d", length);

		/* check for overflow - this would be really fatal */
		if ((mixer_text_length + text_length + 1) > sizeof(mixer_text)) {
			atomic_modify_clear(&r_status_flags, PX4IO_P_STATUS_FLAGS_MIXER_OK);
			return 0;
		}

		/* check if the last item has been processed - bail out if not */
		if (mixer_update_pending) {
			return 1;
		}

		/* append mixer text and nul-terminate, guard against overflow */
		memcpy(&mixer_text[mixer_text_length], msg->text, text_length);
		mixer_text_length += text_length;
		mixer_text[mixer_text_length] = '\0';
		isr_debug(2, "buflen %u", mixer_text_length);

		/* flag the buffer as ready */
		mixer_update_pending = true;

		break;
	}

	return 0;
}

void
mixer_set_failsafe()
{
	/*
	 * Check if a custom failsafe value has been written,
	 * or if the mixer is not ok and bail out.
	 */

	if ((r_setup_arming & PX4IO_P_SETUP_ARMING_FAILSAFE_CUSTOM) ||
	    !(r_status_flags & PX4IO_P_STATUS_FLAGS_MIXER_OK)) {
		return;
	}

	/* set failsafe defaults to the values for all inputs = 0 */
	float	outputs[PX4IO_SERVO_COUNT];
	unsigned mixed;

	if (REG_TO_FLOAT(r_setup_slew_max) > FLT_EPSILON) {
		/* maximum value the outputs of the multirotor mixer are allowed to change in this cycle
		 * factor 2 is needed because actuator outputs are in the range [-1,1]
		 */
		float delta_out_max = 2.0f * 1000.0f * dt / (r_page_servo_control_max[0] - r_page_servo_control_min[0]) / REG_TO_FLOAT(
					      r_setup_slew_max);
		mixer_group.set_max_delta_out_once(delta_out_max);
	}

	/*  set dt to be used in simple mixer for slew rate limiting */
	mixer_group.set_dt_once(dt);

	/* update parameter for mc thrust model if it updated */
	if (update_mc_thrust_param) {
		mixer_group.set_thrust_factor(REG_TO_FLOAT(r_setup_thr_fac));
		update_mc_thrust_param = false;
	}

	/* mix */
	mixed = mixer_mix_threadsafe(&outputs[0], &r_mixer_limits);

	/* scale to PWM and update the servo outputs as required */
	for (unsigned i = 0; i < mixed; i++) {

		/* scale to servo output */
		r_page_servo_failsafe[i] = (outputs[i] * 600.0f) + 1500;

	}

	/* disable the rest of the outputs */
	for (unsigned i = mixed; i < PX4IO_SERVO_COUNT; i++) {
		r_page_servo_failsafe[i] = 0;
	}

}