/****************************************************************************
 *
 *   Copyright (c) 2020 PX4 Development Team. All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 *
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in
 *    the documentation and/or other materials provided with the
 *    distribution.
 * 3. Neither the name PX4 nor the names of its contributors may be
 *    used to endorse or promote products derived from this software
 *    without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
 * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
 * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
 * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
 * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
 * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
 * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
 * POSSIBILITY OF SUCH DAMAGE.
 *
 ****************************************************************************/

#include "Magnetometer.hpp"

#include "Utilities.hpp"

#include <lib/parameters/param.h>

using namespace matrix;
using namespace time_literals;

namespace calibration
{

Magnetometer::Magnetometer()
{
	Reset();
}

Magnetometer::Magnetometer(uint32_t device_id, bool external)
{
	Reset();
	set_device_id(device_id, external);
}

void Magnetometer::set_device_id(uint32_t device_id, bool external)
{
	if (_device_id != device_id || _external != external) {
		set_external(external);
		_device_id = device_id;
		ParametersUpdate();
	}
}

void Magnetometer::set_external(bool external)
{
	// update priority default appropriately if not set
	if (_calibration_index < 0 || _priority < 0) {
		if ((_priority < 0) || (_priority > 100)) {
			_priority = external ? DEFAULT_EXTERNAL_PRIORITY : DEFAULT_PRIORITY;

		} else if (!_external && external && (_priority == DEFAULT_PRIORITY)) {
			// internal -> external
			_priority = DEFAULT_EXTERNAL_PRIORITY;

		} else if (_external && !external && (_priority == DEFAULT_EXTERNAL_PRIORITY)) {
			// external -> internal
			_priority = DEFAULT_PRIORITY;
		}
	}

	_external = external;
}

bool Magnetometer::set_offset(const Vector3f &offset)
{
	if (Vector3f(_offset - offset).longerThan(0.01f)) {
		if (PX4_ISFINITE(offset(0)) && PX4_ISFINITE(offset(1)) && PX4_ISFINITE(offset(2))) {
			_offset = offset;
			_calibration_count++;
			return true;
		}
	}

	return false;
}

bool Magnetometer::set_scale(const Vector3f &scale)
{
	if (Vector3f(_scale.diag() - scale).longerThan(0.01f)) {
		if ((scale(0) > 0.f) && (scale(1) > 0.f) && (scale(2) > 0.f) &&
		    PX4_ISFINITE(scale(0)) && PX4_ISFINITE(scale(1)) && PX4_ISFINITE(scale(2))) {

			_scale(0, 0) = scale(0);
			_scale(1, 1) = scale(1);
			_scale(2, 2) = scale(2);

			_calibration_count++;
			return true;
		}
	}

	return false;
}

bool Magnetometer::set_offdiagonal(const Vector3f &offdiagonal)
{
	if (Vector3f(Vector3f{_scale(0, 1), _scale(0, 2), _scale(1, 2)} - offdiagonal).longerThan(0.01f)) {
		if (PX4_ISFINITE(offdiagonal(0)) && PX4_ISFINITE(offdiagonal(1)) && PX4_ISFINITE(offdiagonal(2))) {

			_scale(0, 1) = offdiagonal(0);
			_scale(1, 0) = offdiagonal(0);

			_scale(0, 2) = offdiagonal(1);
			_scale(2, 0) = offdiagonal(1);

			_scale(1, 2) = offdiagonal(2);
			_scale(2, 1) = offdiagonal(2);

			_calibration_count++;
			return true;
		}
	}

	return false;
}

void Magnetometer::set_rotation(Rotation rotation)
{
	_rotation_enum = rotation;

	// always apply board level adjustments
	_rotation = Dcmf(GetSensorLevelAdjustment()) * get_rot_matrix(rotation);
}

void Magnetometer::ParametersUpdate()
{
	if (_device_id == 0) {
		Reset();
		return;
	}

	_calibration_index = FindCalibrationIndex(SensorString(), _device_id);

	if (_calibration_index >= 0) {

		// CAL_MAGx_ROT
		int32_t rotation_value = GetCalibrationParam(SensorString(), "ROT", _calibration_index);

		if (_external) {
			if ((rotation_value >= ROTATION_MAX) || (rotation_value < 0)) {
				PX4_ERR("External %s %d (%d) invalid rotation %d, resetting to rotation none",
					SensorString(), _device_id, _calibration_index, rotation_value);
				rotation_value = ROTATION_NONE;
				SetCalibrationParam(SensorString(), "ROT", _calibration_index, rotation_value);
			}

			set_rotation(static_cast<Rotation>(rotation_value));

		} else {
			// internal mag, CAL_MAGx_ROT -1
			if (rotation_value != -1) {
				PX4_ERR("Internal %s %d (%d) invalid rotation %d, resetting",
					SensorString(), _device_id, _calibration_index, rotation_value);
				SetCalibrationParam(SensorString(), "ROT", _calibration_index, -1);
			}

			// internal sensors follow board rotation
			set_rotation(GetBoardRotation());
		}

		// CAL_MAGx_PRIO
		_priority = GetCalibrationParam(SensorString(), "PRIO", _calibration_index);

		if ((_priority < 0) || (_priority > 100)) {
			// reset to default, -1 is the uninitialized parameter value
			int32_t new_priority = _external ? DEFAULT_EXTERNAL_PRIORITY : DEFAULT_PRIORITY;

			if (_priority != -1) {
				PX4_ERR("%s %d (%d) invalid priority %d, resetting to %d", SensorString(), _device_id, _calibration_index, _priority,
					new_priority);
			}

			SetCalibrationParam(SensorString(), "PRIO", _calibration_index, new_priority);
			_priority = new_priority;
		}

		// CAL_MAGx_OFF{X,Y,Z}
		set_offset(GetCalibrationParamsVector3f(SensorString(), "OFF", _calibration_index));

		// CAL_MAGx_SCALE{X,Y,Z}
		set_scale(GetCalibrationParamsVector3f(SensorString(), "SCALE", _calibration_index));

		// CAL_MAGx_ODIAG{X,Y,Z}
		set_offdiagonal(GetCalibrationParamsVector3f(SensorString(), "ODIAG", _calibration_index));

		// CAL_MAGx_COMP{X,Y,Z}
		_power_compensation = GetCalibrationParamsVector3f(SensorString(), "COMP", _calibration_index);

	} else {
		Reset();
	}
}

void Magnetometer::Reset()
{
	if (_external) {
		set_rotation(ROTATION_NONE);

	} else {
		// internal sensors follow board rotation
		set_rotation(GetBoardRotation());
	}

	_offset.zero();
	_scale.setIdentity();

	_power_compensation.zero();
	_power = 0.f;

	_priority = _external ? DEFAULT_EXTERNAL_PRIORITY : DEFAULT_PRIORITY;

	_calibration_index = -1;

	_calibration_count = 0;
}

bool Magnetometer::ParametersSave()
{
	if (_calibration_index >= 0) {
		// save calibration
		bool success = true;
		success &= SetCalibrationParam(SensorString(), "ID", _calibration_index, _device_id);
		success &= SetCalibrationParam(SensorString(), "PRIO", _calibration_index, _priority);
		success &= SetCalibrationParamsVector3f(SensorString(), "OFF", _calibration_index, _offset);

		const Vector3f scale{_scale.diag()};
		success &= SetCalibrationParamsVector3f(SensorString(), "SCALE", _calibration_index, scale);

		const Vector3f off_diag{_scale(0, 1), _scale(0, 2), _scale(1, 2)};
		success &= SetCalibrationParamsVector3f(SensorString(), "ODIAG", _calibration_index, off_diag);

		success &= SetCalibrationParamsVector3f(SensorString(), "COMP", _calibration_index, _power_compensation);

		if (_external) {
			success &= SetCalibrationParam(SensorString(), "ROT", _calibration_index, (int32_t)_rotation_enum);

		} else {
			success &= SetCalibrationParam(SensorString(), "ROT", _calibration_index, -1);
		}

		return success;
	}

	return false;
}

void Magnetometer::PrintStatus()
{
	if (external()) {
		PX4_INFO("%s %d EN: %d, offset: [% 05.3f % 05.3f % 05.3f], scale: [% 05.3f % 05.3f % 05.3f], External ROT: %d",
			 SensorString(), device_id(), enabled(),
			 (double)_offset(0), (double)_offset(1), (double)_offset(2),
			 (double)_scale(0, 0), (double)_scale(1, 1), (double)_scale(2, 2),
			 rotation_enum());

	} else {
		PX4_INFO("%s %d EN: %d, offset: [% 05.3f % 05.3f % 05.3f], scale: [% 05.3f % 05.3f % 05.3f], Internal",
			 SensorString(), device_id(), enabled(),
			 (double)_offset(0), (double)_offset(1), (double)_offset(2),
			 (double)_scale(0, 0), (double)_scale(1, 1), (double)_scale(2, 2));
	}

#if defined(DEBUG_BUILD)
	_scale.print();
#endif // DEBUG_BUILD
}

} // namespace calibration