TECS.cpp 23.7 KB
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435 436 437 438 439 440 441 442 443 444 445 446 447 448 449 450 451 452 453 454 455 456 457 458 459 460 461 462 463 464 465 466 467 468 469 470 471 472 473 474 475 476 477 478 479 480 481 482 483 484 485 486 487 488 489 490 491 492 493 494 495 496 497 498 499 500 501 502 503 504 505 506 507 508 509 510 511 512 513 514 515 516 517 518 519 520 521 522 523 524 525 526 527 528 529 530 531 532 533 534 535 536 537 538 539 540 541 542 543 544 545 546 547 548 549 550 551 552 553 554 555 556 557 558 559 560 561 562 563 564 565 566 567 568 569 570 571 572 573 574 575 576 577 578 579 580 581 582 583 584 585 586 587 588 589 590 591 592 593 594 595 596 597 598 599 600 601 602 603 604 605 606 607 608 609 610 611 612 613 614 615 616 617 618 619 620 621 622 623 624
/****************************************************************************
 *
 *   Copyright (c) 2017-2020 PX4 Development Team. All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 *
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in
 *    the documentation and/or other materials provided with the
 *    distribution.
 * 3. Neither the name PX4 nor the names of its contributors may be
 *    used to endorse or promote products derived from this software
 *    without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
 * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
 * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
 * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
 * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
 * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
 * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
 * POSSIBILITY OF SUCH DAMAGE.
 *
 ****************************************************************************/

#include "TECS.hpp"

#include <lib/ecl/geo/geo.h>

#include <px4_platform_common/defines.h>

using math::constrain;
using math::max;
using math::min;

static constexpr float DT_MIN = 0.001f;	///< minimum allowed value of _dt (sec)
static constexpr float DT_MAX = 1.0f;	///< max value of _dt allowed before a filter state reset is performed (sec)

/**
 * @file TECS.cpp
 *
 * @author Paul Riseborough
 */

/*
 * This function implements a complementary filter to estimate the climb rate when
 * inertial nav data is not available. It also calculates a true airspeed derivative
 * which is used by the airspeed complimentary filter.
 */
void TECS::update_vehicle_state_estimates(float equivalent_airspeed, const float speed_deriv_forward,
		bool altitude_lock, bool in_air, float altitude, float vz)
{
	// calculate the time lapsed since the last update
	uint64_t now = hrt_absolute_time();
	float dt = fmaxf((now - _state_update_timestamp) * 1e-6f, DT_MIN);

	bool reset_altitude = false;

	if (_state_update_timestamp == 0 || dt > DT_MAX) {
		dt = DT_DEFAULT;
		reset_altitude = true;
	}

	if (!altitude_lock || !in_air) {
		reset_altitude = true;
	}

	if (reset_altitude) {
		_states_initialized = false;
	}

	_state_update_timestamp = now;
	_EAS = equivalent_airspeed;

	_in_air = in_air;

	// Set the velocity and position state to the the INS data
	_vert_vel_state = -vz;
	_vert_pos_state = altitude;

	// Update and average speed rate of change if airspeed is being measured
	if (PX4_ISFINITE(equivalent_airspeed) && airspeed_sensor_enabled()) {
		_tas_rate_raw = speed_deriv_forward;
		// Apply some noise filtering
		_TAS_rate_filter.update(speed_deriv_forward);
		_tas_rate_filtered = _TAS_rate_filter.getState();

	} else {
		_tas_rate_raw = 0.0f;
		_tas_rate_filtered = 0.0f;
	}

	if (!_in_air) {
		_states_initialized = false;
	}

}

void TECS::_update_speed_states(float equivalent_airspeed_setpoint, float equivalent_airspeed, float EAS2TAS)
{
	// Calculate the time in seconds since the last update and use the default time step value if out of bounds
	uint64_t now = hrt_absolute_time();
	const float dt = constrain((now - _speed_update_timestamp) * 1.0e-6f, DT_MIN, DT_MAX);

	// Convert equivalent airspeed quantities to true airspeed
	_EAS_setpoint = equivalent_airspeed_setpoint;
	_TAS_setpoint  = _EAS_setpoint * EAS2TAS;
	_TAS_max   = _equivalent_airspeed_max * EAS2TAS;
	_TAS_min   = _equivalent_airspeed_min * EAS2TAS;

	// If airspeed measurements are not being used, fix the EAS estimate to halfway between min and max limits
	if (!PX4_ISFINITE(equivalent_airspeed) || !airspeed_sensor_enabled()) {
		_EAS = 0.5f * (_equivalent_airspeed_min + _equivalent_airspeed_max);

	} else {
		_EAS = equivalent_airspeed;
	}

	// If first time through or not flying, reset airspeed states
	if (_speed_update_timestamp == 0 || !_in_air) {
		_tas_rate_state = 0.0f;
		_tas_state = (_EAS * EAS2TAS);
	}

	// Obtain a smoothed TAS estimate using a second order complementary filter

	// Update TAS rate state
	float tas_error = (_EAS * EAS2TAS) - _tas_state;
	float tas_rate_state_input = tas_error * _tas_estimate_freq * _tas_estimate_freq;

	// limit integrator input to prevent windup
	if (_tas_state < 3.1f) {
		tas_rate_state_input = max(tas_rate_state_input, 0.0f);
	}

	// Update TAS state
	_tas_rate_state = _tas_rate_state + tas_rate_state_input * dt;
	float tas_state_input = _tas_rate_state + _tas_rate_raw + tas_error * _tas_estimate_freq * 1.4142f;
	_tas_state = _tas_state + tas_state_input * dt;

	// Limit the TAS state to a minimum of 3 m/s
	_tas_state = max(_tas_state, 3.0f);
	_speed_update_timestamp = now;

}

void TECS::_update_speed_setpoint()
{
	// Set the TAS demand to the minimum value if an underspeed or
	// or a uncontrolled descent condition exists to maximise climb rate
	if ((_uncommanded_descent_recovery) || (_underspeed_detected)) {
		_TAS_setpoint = _TAS_min;
	}

	_TAS_setpoint = constrain(_TAS_setpoint, _TAS_min, _TAS_max);

	// Calculate limits for the demanded rate of change of speed based on physical performance limits
	// with a 50% margin to allow the total energy controller to correct for errors.
	float velRateMax = 0.5f * _STE_rate_max / _tas_state;
	float velRateMin = 0.5f * _STE_rate_min / _tas_state;

	_TAS_setpoint_adj = constrain(_TAS_setpoint, _TAS_min, _TAS_max);

	// calculate the demanded true airspeed rate of change based on first order response of true airspeed error
	_TAS_rate_setpoint = constrain((_TAS_setpoint_adj - _tas_state) * _airspeed_error_gain, velRateMin, velRateMax);

}

void TECS::_update_height_setpoint(float desired, float state)
{
	// Detect first time through and initialize previous value to demand
	if (PX4_ISFINITE(desired) && fabsf(_hgt_setpoint_in_prev) < 0.1f) {
		_hgt_setpoint_in_prev = desired;
	}

	// Apply a 2 point moving average to demanded height to reduce
	// intersampling noise effects.
	if (PX4_ISFINITE(desired)) {
		_hgt_setpoint = 0.5f * (desired + _hgt_setpoint_in_prev);

	} else {
		_hgt_setpoint = _hgt_setpoint_in_prev;
	}

	_hgt_setpoint_in_prev = _hgt_setpoint;

	// Apply a rate limit to respect vehicle performance limitations
	if ((_hgt_setpoint - _hgt_setpoint_prev) > (_max_climb_rate * _dt)) {
		_hgt_setpoint = _hgt_setpoint_prev + _max_climb_rate * _dt;

	} else if ((_hgt_setpoint - _hgt_setpoint_prev) < (-_max_sink_rate * _dt)) {
		_hgt_setpoint = _hgt_setpoint_prev - _max_sink_rate * _dt;
	}

	_hgt_setpoint_prev = _hgt_setpoint;

	// Apply a first order noise filter
	_hgt_setpoint_adj = 0.1f * _hgt_setpoint + 0.9f * _hgt_setpoint_adj_prev;

	// Use a first order system to calculate a height rate setpoint from the current height error.
	// Additionally, allow to add feedforward from heigh setpoint change
	_hgt_rate_setpoint = (_hgt_setpoint_adj - state) * _height_error_gain + _height_setpoint_gain_ff *
			     (_hgt_setpoint_adj - _hgt_setpoint_adj_prev) / _dt;

	_hgt_setpoint_adj_prev = _hgt_setpoint_adj;

	// Limit the rate of change of height demand to respect vehicle performance limits
	if (_hgt_rate_setpoint > _max_climb_rate) {
		_hgt_rate_setpoint = _max_climb_rate;

	} else if (_hgt_rate_setpoint < -_max_sink_rate) {
		_hgt_rate_setpoint = -_max_sink_rate;
	}
}

void TECS::_detect_underspeed()
{
	if (!_detect_underspeed_enabled) {
		_underspeed_detected = false;
		return;
	}

	if (((_tas_state < _TAS_min * 0.9f) && (_last_throttle_setpoint >= _throttle_setpoint_max * 0.95f))
	    || ((_vert_pos_state < _hgt_setpoint_adj) && _underspeed_detected)) {

		_underspeed_detected = true;

	} else {
		_underspeed_detected = false;
	}
}

void TECS::_update_energy_estimates()
{
	// Calculate specific energy demands in units of (m**2/sec**2)
	_SPE_setpoint = _hgt_setpoint_adj * CONSTANTS_ONE_G; // potential energy
	_SKE_setpoint = 0.5f * _TAS_setpoint_adj * _TAS_setpoint_adj; // kinetic energy

	// Calculate total energy error
	_STE_error = _SPE_setpoint - _SPE_estimate + _SKE_setpoint - _SKE_estimate;

	// Calculate the specific energy balance demand which specifies how the available total
	// energy should be allocated to speed (kinetic energy) and height (potential energy)
	// Calculate the specific energy balance error
	_SEB_error = SEB_setpoint() - (_SPE_estimate * _SPE_weighting - _SKE_estimate * _SKE_weighting);

	// Calculate specific energy rate demands in units of (m**2/sec**3)
	_SPE_rate_setpoint = _hgt_rate_setpoint * CONSTANTS_ONE_G; // potential energy rate of change
	_SKE_rate_setpoint = _tas_state * _TAS_rate_setpoint; // kinetic energy rate of change

	// Calculate specific energies in units of (m**2/sec**2)
	_SPE_estimate = _vert_pos_state * CONSTANTS_ONE_G; // potential energy
	_SKE_estimate = 0.5f * _tas_state * _tas_state; // kinetic energy

	// Calculate specific energy rates in units of (m**2/sec**3)
	_SPE_rate = _vert_vel_state * CONSTANTS_ONE_G; // potential energy rate of change
	_SKE_rate = _tas_state * _tas_rate_filtered;// kinetic energy rate of change
}

void TECS::_update_throttle_setpoint(const float throttle_cruise)
{
	// Calculate demanded rate of change of total energy, respecting vehicle limits.
	// We will constrain the value below.
	float STE_rate_setpoint = _SPE_rate_setpoint + _SKE_rate_setpoint;

	// Calculate the total energy rate error, applying a first order IIR filter
	// to reduce the effect of accelerometer noise
	_STE_rate_error_filter.update(-_SPE_rate - _SKE_rate + _SPE_rate_setpoint + _SKE_rate_setpoint);
	_STE_rate_error = _STE_rate_error_filter.getState();

	float throttle_setpoint;

	// Calculate the throttle demand
	if (_underspeed_detected) {
		// always use full throttle to recover from an underspeed condition
		throttle_setpoint = _throttle_setpoint_max;

	} else {
		// Adjust the demanded total energy rate to compensate for induced drag rise in turns.
		// Assume induced drag scales linearly with normal load factor.
		// The additional normal load factor is given by (1/cos(bank angle) - 1)
		STE_rate_setpoint = STE_rate_setpoint + _load_factor_correction * (_load_factor - 1.f);

		STE_rate_setpoint = constrain(STE_rate_setpoint, _STE_rate_min, _STE_rate_max);

		// Calculate a predicted throttle from the demanded rate of change of energy, using the cruise throttle
		// as the starting point. Assume:
		// Specific total energy rate = _STE_rate_max is achieved when throttle is set to _throttle_setpoint_max
		// Specific total energy rate = 0 at cruise throttle
		// Specific total energy rate = _STE_rate_min is achieved when throttle is set to _throttle_setpoint_min
		float throttle_predicted = 0.0f;

		if (STE_rate_setpoint >= 0) {
			// throttle is between cruise and maximum
			throttle_predicted = throttle_cruise + STE_rate_setpoint / _STE_rate_max * (_throttle_setpoint_max - throttle_cruise);

		} else {
			// throttle is between cruise and minimum
			throttle_predicted = throttle_cruise + STE_rate_setpoint / _STE_rate_min * (_throttle_setpoint_min - throttle_cruise);

		}

		// Calculate gain scaler from specific energy rate error to throttle
		const float STE_rate_to_throttle = 1.0f / (_STE_rate_max - _STE_rate_min);

		// Add proportional and derivative control feedback to the predicted throttle and constrain to throttle limits
		throttle_setpoint = (_STE_rate_error * _throttle_damping_gain) * STE_rate_to_throttle + throttle_predicted;
		throttle_setpoint = constrain(throttle_setpoint, _throttle_setpoint_min, _throttle_setpoint_max);

		if (airspeed_sensor_enabled()) {
			if (_integrator_gain_throttle > 0.0f) {
				float integ_state_max = _throttle_setpoint_max - throttle_setpoint;
				float integ_state_min = _throttle_setpoint_min - throttle_setpoint;

				float throttle_integ_input = (_STE_rate_error * _integrator_gain_throttle) * _dt *
							     STE_rate_to_throttle;

				// only allow integrator propagation into direction which unsaturates throttle
				if (_throttle_integ_state > integ_state_max) {
					throttle_integ_input = math::min(0.f, throttle_integ_input);

				} else if (_throttle_integ_state < integ_state_min) {
					throttle_integ_input = math::max(0.f, throttle_integ_input);
				}

				// Calculate a throttle demand from the integrated total energy rate error
				// This will be added to the total throttle demand to compensate for steady state errors
				_throttle_integ_state = _throttle_integ_state + throttle_integ_input;

				if (_climbout_mode_active) {
					// During climbout, set the integrator to maximum throttle to prevent transient throttle drop
					// at end of climbout when we transition to closed loop throttle control
					_throttle_integ_state = integ_state_max;
				}

			} else {
				_throttle_integ_state = 0.0f;
			}

		}

		if (airspeed_sensor_enabled()) {
			// Add the integrator feedback during closed loop operation with an airspeed sensor
			throttle_setpoint += _throttle_integ_state;

		} else {
			// when flying without an airspeed sensor, use the predicted throttle only
			throttle_setpoint = throttle_predicted;

		}
	}

	// Rate limit the throttle demand
	if (fabsf(_throttle_slewrate) > 0.01f) {
		const float throttle_increment_limit = _dt * (_throttle_setpoint_max - _throttle_setpoint_min) * _throttle_slewrate;
		throttle_setpoint = constrain(throttle_setpoint, _last_throttle_setpoint - throttle_increment_limit,
					      _last_throttle_setpoint + throttle_increment_limit);
	}

	_last_throttle_setpoint = constrain(throttle_setpoint, _throttle_setpoint_min, _throttle_setpoint_max);
}

void TECS::_detect_uncommanded_descent()
{
	/*
	 * This function detects a condition that can occur when the demanded airspeed is greater than the
	 * aircraft can achieve in level flight. When this occurs, the vehicle will continue to reduce height
	 * while attempting to maintain speed.
	*/

	// Calculate rate of change of total specific energy
	const float STE_rate = _SPE_rate + _SKE_rate;

	// If total energy is very low and reducing, throttle is high, and we are not in an underspeed condition, then enter uncommanded descent recovery mode
	const bool enter_mode = !_uncommanded_descent_recovery && !_underspeed_detected && (_STE_error > 200.0f)
				&& (STE_rate < 0.0f)
				&& (_last_throttle_setpoint >= _throttle_setpoint_max * 0.9f);

	// If we enter an underspeed condition or recover the required total energy, then exit uncommanded descent recovery mode
	const bool exit_mode = _uncommanded_descent_recovery && (_underspeed_detected || (_STE_error < 0.0f));

	if (enter_mode) {
		_uncommanded_descent_recovery = true;

	} else if (exit_mode) {
		_uncommanded_descent_recovery = false;

	}
}

void TECS::_update_pitch_setpoint()
{
	/*
	 * The SKE_weighting variable controls how speed and height control are prioritised by the pitch demand calculation.
	 * A weighting of 1 givea equal speed and height priority
	 * A weighting of 0 gives 100% priority to height control and must be used when no airspeed measurement is available.
	 * A weighting of 2 provides 100% priority to speed control and is used when:
	 * a) an underspeed condition is detected.
	 * b) during climbout where a minimum pitch angle has been set to ensure height is gained. If the airspeed
	 * rises above the demanded value, the pitch angle demand is increased by the TECS controller to prevent the vehicle overspeeding.
	 * The weighting can be adjusted between 0 and 2 depending on speed and height accuracy requirements.
	*/

	// Calculate the specific energy balance rate demand
	const float SEB_rate_setpoint = _SPE_rate_setpoint * _SPE_weighting - _SKE_rate_setpoint * _SKE_weighting;

	// Calculate the specific energy balance rate error
	_SEB_rate_error = SEB_rate_setpoint - (_SPE_rate * _SPE_weighting - _SKE_rate * _SKE_weighting);

	// Calculate derivative from change in climb angle to rate of change of specific energy balance
	const float climb_angle_to_SEB_rate = _tas_state * CONSTANTS_ONE_G;

	if (_integrator_gain_pitch > 0.0f) {
		// Calculate pitch integrator input term
		float pitch_integ_input = _SEB_rate_error * _integrator_gain_pitch;

		// Prevent the integrator changing in a direction that will increase pitch demand saturation
		if (_pitch_setpoint_unc > _pitch_setpoint_max) {
			pitch_integ_input = min(pitch_integ_input, 0.f);

		} else if (_pitch_setpoint_unc < _pitch_setpoint_min) {
			pitch_integ_input = max(pitch_integ_input, 0.f);
		}

		// Update the pitch integrator state.
		_pitch_integ_state = _pitch_integ_state + pitch_integ_input * _dt;

	} else {
		_pitch_integ_state = 0.0f;
	}

	// Calculate a specific energy correction that doesn't include the integrator contribution
	float SEB_rate_correction = _SEB_rate_error * _pitch_damping_gain + _pitch_integ_state + _SEB_rate_ff *
				    SEB_rate_setpoint;

	// During climbout, bias the demanded pitch angle so that a zero speed error produces a pitch angle
	// demand equal to the minimum pitch angle set by the mission plan. This prevents the integrator
	// having to catch up before the nose can be raised to reduce excess speed during climbout.
	if (_climbout_mode_active) {
		SEB_rate_correction += _pitch_setpoint_min * climb_angle_to_SEB_rate;
	}

	// Convert the specific energy balance rate correction to a target pitch angle. This calculation assumes:
	// a) The climb angle follows pitch angle with a lag that is small enough not to destabilise the control loop.
	// b) The offset between climb angle and pitch angle (angle of attack) is constant, excluding the effect of
	// pitch transients due to control action or turbulence.
	_pitch_setpoint_unc = SEB_rate_correction / climb_angle_to_SEB_rate;

	float pitch_setpoint = constrain(_pitch_setpoint_unc, _pitch_setpoint_min, _pitch_setpoint_max);

	// Comply with the specified vertical acceleration limit by applying a pitch rate limit
	const float ptchRateIncr = _dt * _vert_accel_limit / _tas_state;
	_last_pitch_setpoint = constrain(pitch_setpoint, _last_pitch_setpoint - ptchRateIncr,
					 _last_pitch_setpoint + ptchRateIncr);
}

void TECS::_initialize_states(float pitch, float throttle_cruise, float baro_altitude, float pitch_min_climbout,
			      float EAS2TAS)
{
	if (_pitch_update_timestamp == 0 || _dt > DT_MAX || !_in_air || !_states_initialized) {
		// On first time through or when not using TECS of if there has been a large time slip,
		// states must be reset to allow filters to a clean start
		_vert_vel_state = 0.0f;
		_vert_pos_state = baro_altitude;
		_tas_rate_state = 0.0f;
		_tas_state = _EAS * EAS2TAS;
		_throttle_integ_state =  0.0f;
		_pitch_integ_state = 0.0f;
		_last_throttle_setpoint = (_in_air ? throttle_cruise : 0.0f);;
		_last_pitch_setpoint = constrain(pitch, _pitch_setpoint_min, _pitch_setpoint_max);
		_pitch_setpoint_unc = _last_pitch_setpoint;
		_hgt_setpoint_adj_prev = baro_altitude;
		_hgt_setpoint_adj = _hgt_setpoint_adj_prev;
		_hgt_setpoint_prev = _hgt_setpoint_adj_prev;
		_hgt_setpoint_in_prev = _hgt_setpoint_adj_prev;
		_TAS_setpoint_last = _EAS * EAS2TAS;
		_TAS_setpoint_adj = _TAS_setpoint_last;
		_underspeed_detected = false;
		_uncommanded_descent_recovery = false;
		_STE_rate_error = 0.0f;

		if (_dt > DT_MAX || _dt < DT_MIN) {
			_dt = DT_DEFAULT;
		}

	} else if (_climbout_mode_active) {
		// During climbout use the lower pitch angle limit specified by the
		// calling controller
		_pitch_setpoint_min	   = pitch_min_climbout;

		// throttle lower limit is set to a value that prevents throttle reduction
		_throttle_setpoint_min  = _throttle_setpoint_max - 0.01f;

		// height demand and associated states are set to track the measured height
		_hgt_setpoint_adj_prev  = baro_altitude;
		_hgt_setpoint_adj       = _hgt_setpoint_adj_prev;
		_hgt_setpoint_prev      = _hgt_setpoint_adj_prev;

		// airspeed demand states are set to track the measured airspeed
		_TAS_setpoint_last      = _EAS * EAS2TAS;
		_TAS_setpoint_adj       = _EAS * EAS2TAS;

		// disable speed and decent error condition checks
		_underspeed_detected = false;
		_uncommanded_descent_recovery = false;
	}

	// filter specific energy rate error using first order filter with 0.5 second time constant
	_STE_rate_error_filter.setParameters(DT_DEFAULT, _STE_rate_time_const);
	_STE_rate_error_filter.reset(0.0f);

	// filter true airspeed rate using first order filter with 0.5 second time constant
	_TAS_rate_filter.setParameters(DT_DEFAULT, _speed_derivative_time_const);
	_TAS_rate_filter.reset(0.0f);

	_states_initialized = true;
}

void TECS::_update_STE_rate_lim()
{
	// Calculate the specific total energy upper rate limits from the max throttle climb rate
	_STE_rate_max = _max_climb_rate * CONSTANTS_ONE_G;

	// Calculate the specific total energy lower rate limits from the min throttle sink rate
	_STE_rate_min = - _min_sink_rate * CONSTANTS_ONE_G;
}

void TECS::update_pitch_throttle(float pitch, float baro_altitude, float hgt_setpoint,
				 float EAS_setpoint, float equivalent_airspeed, float eas_to_tas, bool climb_out_setpoint, float pitch_min_climbout,
				 float throttle_min, float throttle_max, float throttle_cruise, float pitch_limit_min, float pitch_limit_max)
{
	// Calculate the time since last update (seconds)
	uint64_t now = hrt_absolute_time();
	_dt = fmaxf((now - _pitch_update_timestamp) * 1e-6f, DT_MIN);

	// Set class variables from inputs
	_throttle_setpoint_max = throttle_max;
	_throttle_setpoint_min = throttle_min;
	_pitch_setpoint_max = pitch_limit_max;
	_pitch_setpoint_min = pitch_limit_min;
	_climbout_mode_active = climb_out_setpoint;

	// Initialize selected states and variables as required
	_initialize_states(pitch, throttle_cruise, baro_altitude, pitch_min_climbout, eas_to_tas);

	// Don't run TECS control algorithms when not in flight
	if (!_in_air) {
		return;
	}

	// Update the true airspeed state estimate
	_update_speed_states(EAS_setpoint, equivalent_airspeed, eas_to_tas);

	// Calculate rate limits for specific total energy
	_update_STE_rate_lim();

	// Detect an underspeed condition
	_detect_underspeed();

	_update_speed_height_weights();

	// Detect an uncommanded descent caused by an unachievable airspeed demand
	_detect_uncommanded_descent();

	// Calculate the demanded true airspeed
	_update_speed_setpoint();

	// Calculate the demanded height
	_update_height_setpoint(hgt_setpoint, baro_altitude);

	// Calculate the specific energy values required by the control loop
	_update_energy_estimates();

	// Calculate the throttle demand
	_update_throttle_setpoint(throttle_cruise);

	// Calculate the pitch demand
	_update_pitch_setpoint();

	// Update time stamps
	_pitch_update_timestamp = now;

	// Set TECS mode for next frame
	if (_underspeed_detected) {
		_tecs_mode = ECL_TECS_MODE_UNDERSPEED;

	} else if (_uncommanded_descent_recovery) {
		_tecs_mode = ECL_TECS_MODE_BAD_DESCENT;

	} else if (_climbout_mode_active) {
		_tecs_mode = ECL_TECS_MODE_CLIMBOUT;

	} else {
		// This is the default operation mode
		_tecs_mode = ECL_TECS_MODE_NORMAL;
	}

}

void TECS::_update_speed_height_weights()
{
	// Calculate the weight applied to control of specific kinetic energy error
	_SKE_weighting = constrain(_pitch_speed_weight, 0.0f, 2.0f);

	if ((_underspeed_detected || _climbout_mode_active) && airspeed_sensor_enabled()) {
		_SKE_weighting = 2.0f;

	} else if (!airspeed_sensor_enabled()) {
		_SKE_weighting = 0.0f;
	}

	// don't allow any weight to be larger than one, as it has the same effect as reducing the control
	// loop time constant and therefore can lead to a destabilization of that control loop
	_SPE_weighting = constrain(2.0f - _SKE_weighting, 0.f, 1.f);
	_SKE_weighting = constrain(_SKE_weighting, 0.f, 1.f);
}