hw_config.h
6.75 KB
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
/****************************************************************************
*
* Copyright (C) 2020 PX4 Development Team. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name PX4 nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
#pragma once
/****************************************************************************
* 10-8--2016:
* To simplify the ripple effect on the tools, we will be using
* /dev/serial/by-id/<asterisk>PX4<asterisk> to locate PX4 devices. Therefore
* moving forward all Bootloaders must contain the prefix "PX4 BL "
* in the USBDEVICESTRING
* This Change will be made in an upcoming BL release
****************************************************************************/
/*
* Define usage to configure a bootloader
*
*
* Constant example Usage
* APP_LOAD_ADDRESS 0x08004000 - The address in Linker Script, where the app fw is org-ed
* BOOTLOADER_DELAY 5000 - Ms to wait while under USB pwr or bootloader request
* BOARD_FMUV2
* INTERFACE_USB 1 - (Optional) Scan and use the USB interface for bootloading
* INTERFACE_USART 1 - (Optional) Scan and use the Serial interface for bootloading
* USBDEVICESTRING "PX4 BL FMU v2.x" - USB id string
* USBPRODUCTID 0x0011 - PID Should match defconfig
* BOOT_DELAY_ADDRESS 0x000001a0 - (Optional) From the linker script from Linker Script to get a custom
* delay provided by an APP FW
* BOARD_TYPE 9 - Must match .prototype boad_id
* _FLASH_KBYTES (*(uint16_t *)0x1fff7a22) - Run time flash size detection
* BOARD_FLASH_SECTORS ((_FLASH_KBYTES == 0x400) ? 11 : 23) - Run time determine the physical last sector
* BOARD_FLASH_SECTORS 11 - Hard coded zero based last sector
* BOARD_FLASH_SIZE (_FLASH_KBYTES*1024)- Total Flash size of device, determined at run time.
* (1024 * 1024) - Hard coded Total Flash of device - The bootloader and app reserved will be deducted
* programmatically
*
* BOARD_FIRST_FLASH_SECTOR_TO_ERASE 2 - Optional sectors index in the flash_sectors table (F4 only), to begin erasing.
* This is to allow sectors to be reserved for app fw usage. That will NOT be erased
* during a FW upgrade.
* The default is 0, and selects the first sector to be erased, as the 0th entry in the
* flash_sectors table. Which is the second physical sector of FLASH in the device.
* The first physical sector of FLASH is used by the bootloader, and is not defined
* in the table.
*
* APP_RESERVATION_SIZE (BOARD_FIRST_FLASH_SECTOR_TO_ERASE * 16 * 1024) - Number of bytes reserved by the APP FW. This number plus
* BOOTLOADER_RESERVATION_SIZE will be deducted from
* BOARD_FLASH_SIZE to determine the size of the App FW
* and hence the address space of FLASH to erase and program.
* USBMFGSTRING "PX4 AP" - Optional USB MFG string (default is '3D Robotics' if not defined.)
* SERIAL_BREAK_DETECT_DISABLED - Optional prevent break selection on Serial port from entering or staying in BL
*
* * Other defines are somewhat self explanatory.
*/
/* Boot device selection list*/
#define USB0_DEV 0x01
#define SERIAL0_DEV 0x02
#define SERIAL1_DEV 0x04
#define APP_LOAD_ADDRESS 0x08020000
#define BOOTLOADER_DELAY 5000
#define INTERFACE_USB 1
#define INTERFACE_USB_CONFIG "/dev/ttyACM0"
#define BOARD_VBUS MK_GPIO_INPUT(GPIO_OTGFS_VBUS)
//#define USE_VBUS_PULL_DOWN
#define INTERFACE_USART 1
#define INTERFACE_USART_CONFIG "/dev/ttyS0,115200"
#define BOOT_DELAY_ADDRESS 0x000001a0
#define BOARD_TYPE 1024
#define _FLASH_KBYTES (*(uint32_t *)0x1FF1E880)
#define BOARD_FLASH_SECTORS (15)
#define BOARD_FLASH_SIZE (_FLASH_KBYTES * 1024)
#define OSC_FREQ 24
#define BOARD_PIN_LED_ACTIVITY GPIO_nLED_RED
#define BOARD_PIN_LED_BOOTLOADER GPIO_nLED_RED
#define BOARD_LED_ON 0
#define BOARD_LED_OFF 1
#define SERIAL_BREAK_DETECT_DISABLED 1
#if !defined(ARCH_SN_MAX_LENGTH)
# define ARCH_SN_MAX_LENGTH 12
#endif
#if !defined(APP_RESERVATION_SIZE)
# define APP_RESERVATION_SIZE 0
#endif
#if !defined(BOARD_FIRST_FLASH_SECTOR_TO_ERASE)
# define BOARD_FIRST_FLASH_SECTOR_TO_ERASE 1
#endif
#if !defined(USB_DATA_ALIGN)
# define USB_DATA_ALIGN
#endif
#ifndef BOOT_DEVICES_SELECTION
# define BOOT_DEVICES_SELECTION USB0_DEV|SERIAL0_DEV|SERIAL1_DEV
#endif
#ifndef BOOT_DEVICES_FILTER_ONUSB
# define BOOT_DEVICES_FILTER_ONUSB USB0_DEV|SERIAL0_DEV|SERIAL1_DEV
#endif