/****************************************************************************
 *
 *   Copyright (c) 2012, 2013 PX4 Development Team. All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 *
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in
 *    the documentation and/or other materials provided with the
 *    distribution.
 * 3. Neither the name PX4 nor the names of its contributors may be
 *    used to endorse or promote products derived from this software
 *    without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
 * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
 * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
 * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
 * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
 * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
 * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
 * POSSIBILITY OF SUCH DAMAGE.
 *
 ****************************************************************************/

/**
 * @file bl_update.c
 *
 * STM32F4 & STM32F7 bootloader update tool.
 */

#include <px4_platform_common/px4_config.h>
#include <px4_platform_common/log.h>
#include <px4_platform_common/module.h>

#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <stdbool.h>
#include <unistd.h>
#include <fcntl.h>
#include <sys/stat.h>

#include <arch/board/board.h>

#include <nuttx/progmem.h>

#if defined(CONFIG_ARCH_CHIP_STM32H7)
#  define BL_FILE_SIZE_LIMIT	128*1024
#  define STM_RAM_BASE        STM32_AXISRAM_BASE
#  define PAGE_SIZE_MATTERS   1
#else
#  define BL_FILE_SIZE_LIMIT  16384
#  define STM_RAM_BASE        STM32_SRAM_BASE
#endif

__EXPORT int bl_update_main(int argc, char *argv[]);

#if defined (CONFIG_STM32_STM32F4XXX) || defined (CONFIG_ARCH_CHIP_STM32F7) || \
    defined (CONFIG_ARCH_CHIP_STM32H7)

static int setopt(void);

static void print_usage(const char *reason)
{
	if (reason) {
		PX4_ERR("%s", reason);
	}

	PRINT_MODULE_DESCRIPTION("Utility to flash the bootloader from a file");

	PRINT_MODULE_USAGE_NAME_SIMPLE("bl_update", "command");
	PRINT_MODULE_USAGE_COMMAND_DESCR("setopt", "Set option bits to unlock the FLASH (only needed if in locked state)");

	PRINT_MODULE_USAGE_COMMAND_DESCR("<file>", "Bootloader bin file");
}

#endif // defined (CONFIG_STM32_STM32F4XXX) || defined (CONFIG_ARCH_CHIP_STM32F7)


int
bl_update_main(int argc, char *argv[])
{
#if !(defined (CONFIG_STM32_STM32F4XXX) || defined (CONFIG_ARCH_CHIP_STM32F7) \
    || defined (CONFIG_ARCH_CHIP_STM32H7))
	PX4_ERR("Not supported on this HW");
	return 1;
}
#else

	if (argc != 2)
	{
		print_usage("missing firmware filename or command");
		return 1;
	}

	if (!strcmp(argv[1], "setopt"))
	{
		return setopt();
	}

	int fd = open(argv[1], O_RDONLY);

	if (fd < 0)
	{
		PX4_ERR("open %s failed", argv[1]);
		return 1;
	}

	struct stat s;

	if (stat(argv[1], &s) != 0)
	{
		PX4_ERR("stat %s failed", argv[1]);
		close(fd);
		return 1;
	}

	/* sanity-check file size */
	if (s.st_size > BL_FILE_SIZE_LIMIT)
	{
		PX4_ERR("%s: file too large (limit: %u, actual: %d)", argv[1], BL_FILE_SIZE_LIMIT, s.st_size);
		close(fd);
		return 1;
	}

	off_t file_size = s.st_size;
	off_t image_size = file_size;

#if defined(PAGE_SIZE_MATTERS)
	size_t page_size =  up_progmem_pagesize(0) - 1;
	image_size = (file_size + page_size) & ~page_size;
#endif

	uint8_t *buf = malloc(image_size);
	memset(buf, 0xff, image_size);

	if (buf == NULL)
	{
		PX4_ERR("failed to allocate %u bytes for firmware buffer", file_size);
		close(fd);
		return 1;
	}

	if (read(fd, buf, file_size) != file_size)
	{
		PX4_ERR("firmware read error");
		close(fd);
		free(buf);
		return 1;
	}

	close(fd);

	uint32_t *hdr = (uint32_t *)buf;

	if ((hdr[0] < STM_RAM_BASE) ||			/* stack not below RAM */
	    (hdr[0] > (STM_RAM_BASE + (128 * 1024))) ||	/* stack not above RAM */
	    (hdr[1] < PX4_FLASH_BASE) ||			/* entrypoint not below flash */
	    ((hdr[1] - PX4_FLASH_BASE) > BL_FILE_SIZE_LIMIT))  		/* entrypoint not outside bootloader */
	{
		free(buf);
		PX4_ERR("not a bootloader image");
		return 1;
	}

	PX4_INFO("image validated, erasing bootloader...");
	px4_usleep(10000);

	/* prevent other tasks from running while we do this */
	sched_lock();

	const size_t page = 0;
	uint8_t *base = (uint8_t *) PX4_FLASH_BASE;

	ssize_t size = up_progmem_eraseblock(page);

	if (size != BL_FILE_SIZE_LIMIT)
	{
		PX4_ERR("erase error at %p", &base[size]);
	}

	PX4_INFO("flashing...");

	/* now program the bootloader - speed is not critical so use x8 mode */

	size = up_progmem_write((size_t) base, buf, image_size);

	if (size != image_size)
	{
		PX4_ERR("program error at %p",  &base[size]);
		goto flash_end;
	}

	/* re-lock the flash control register */

	stm32_flash_lock();

	PX4_INFO("verifying...");

	/* now run a verify pass */
	for (int i = 0; i < image_size; i++)
	{
		if (base[i] != buf[i]) {
			PX4_WARN("verify failed at %i - retry update, DO NOT reboot", i);
			goto flash_end;
		}
	}

	PX4_INFO("bootloader update complete");

flash_end:
	/* unlock the scheduler */
	sched_unlock();

	free(buf);
	exit(0);
}

static int
setopt(void)
{
	volatile uint32_t *optcr = (volatile uint32_t *)0x40023c14;

	const uint16_t opt_mask = (3 << 2);		/* BOR_LEV bitmask */
	const uint16_t opt_bits = (0 << 2);		/* BOR = 0, setting for 2.7-3.6V operation */

	if ((*optcr & opt_mask) == opt_bits) {
		PX4_INFO("option bits are already set as required");
		return 0;
	}

	/* unlock the control register */
	volatile uint32_t *optkeyr = (volatile uint32_t *)0x40023c08;
	*optkeyr = 0x08192a3bU;
	*optkeyr = 0x4c5d6e7fU;

	if (*optcr & 1) {
		PX4_ERR("option control register unlock failed");
		return 1;
	}

	/* program the new option value */
	*optcr = (*optcr & ~opt_mask) | opt_bits | (1 << 1);

	px4_usleep(1000);

	if ((*optcr & opt_mask) == opt_bits) {
		PX4_INFO("option bits set");
		return 0;
	}

	PX4_ERR("option bits setting failed; readback 0x%04" PRIx32, *optcr);
	return 1;
}
#endif // defined (CONFIG_STM32_STM32F4XXX) || defined (CONFIG_ARCH_CHIP_STM32F7)