ADIS16448.hpp 4.82 KB
/****************************************************************************
 *
 *   Copyright (c) 2021 PX4 Development Team. All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 *
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in
 *    the documentation and/or other materials provided with the
 *    distribution.
 * 3. Neither the name PX4 nor the names of its contributors may be
 *    used to endorse or promote products derived from this software
 *    without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
 * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
 * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
 * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
 * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
 * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
 * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
 * POSSIBILITY OF SUCH DAMAGE.
 *
 ****************************************************************************/

/**
 * @file ADIS16448.hpp
 *
 * Driver for the Analog Devices ADIS16448 connected via SPI.
 *
 */

#pragma once

#include "Analog_Devices_ADIS16448_registers.hpp"

#include <drivers/drv_hrt.h>
#include <lib/drivers/device/spi.h>
#include <lib/drivers/accelerometer/PX4Accelerometer.hpp>
#include <lib/drivers/barometer/PX4Barometer.hpp>
#include <lib/drivers/gyroscope/PX4Gyroscope.hpp>
#include <lib/drivers/magnetometer/PX4Magnetometer.hpp>
#include <lib/ecl/geo/geo.h>
#include <lib/perf/perf_counter.h>
#include <px4_platform_common/atomic.h>
#include <px4_platform_common/i2c_spi_buses.h>

using namespace Analog_Devices_ADIS16448;

class ADIS16448 : public device::SPI, public I2CSPIDriver<ADIS16448>
{
public:
	ADIS16448(I2CSPIBusOption bus_option, int bus, uint32_t device, enum Rotation rotation, int bus_frequency,
		  spi_drdy_gpio_t drdy_gpio);
	~ADIS16448() override;

	static I2CSPIDriverBase *instantiate(const BusCLIArguments &cli, const BusInstanceIterator &iterator,
					     int runtime_instance);
	static void print_usage();

	void RunImpl();

	int init() override;
	void print_status() override;

private:
	void exit_and_cleanup() override;

	struct register_config_t {
		Register reg;
		uint16_t set_bits{0};
		uint16_t clear_bits{0};
	};

	int probe() override;

	bool Reset();

	bool Configure();

	static int DataReadyInterruptCallback(int irq, void *context, void *arg);
	void DataReady();
	bool DataReadyInterruptConfigure();
	bool DataReadyInterruptDisable();

	bool RegisterCheck(const register_config_t &reg_cfg);

	uint16_t RegisterRead(Register reg);
	void RegisterWrite(Register reg, uint16_t value);
	void RegisterSetAndClearBits(Register reg, uint16_t setbits, uint16_t clearbits);

	const spi_drdy_gpio_t _drdy_gpio;

	PX4Accelerometer _px4_accel;
	PX4Barometer _px4_baro;
	PX4Gyroscope _px4_gyro;
	PX4Magnetometer _px4_mag;

	perf_counter_t _reset_perf{perf_alloc(PC_COUNT, MODULE_NAME": reset")};
	perf_counter_t _perf_crc_bad{perf_counter_t(perf_alloc(PC_COUNT, MODULE_NAME": CRC16 bad"))};
	perf_counter_t _bad_register_perf{perf_alloc(PC_COUNT, MODULE_NAME": bad register")};
	perf_counter_t _bad_transfer_perf{perf_alloc(PC_COUNT, MODULE_NAME": bad transfer")};

	hrt_abstime _reset_timestamp{0};
	hrt_abstime _last_config_check_timestamp{0};
	int _failure_count{0};

	bool _check_crc{false}; // CRC-16 not supported on earlier models (eg ADIS16448AMLZ)
	bool _data_ready_interrupt_enabled{false};

	bool _self_test_passed{false};

	enum class STATE : uint8_t {
		RESET,
		WAIT_FOR_RESET,
		SELF_TEST_CHECK,
		CONFIGURE,
		READ,
	} _state{STATE::RESET};

	uint8_t _checked_register{0};
	static constexpr uint8_t size_register_cfg{4};
	register_config_t _register_cfg[size_register_cfg] {
		// Register               | Set bits, Clear bits
		{ Register::MSC_CTRL,     MSC_CTRL_BIT::CRC16_for_burst, 0 },
		{ Register::SMPL_PRD,     SMPL_PRD_BIT::internal_sampling_clock, SMPL_PRD_BIT::decimation_rate },
		{ Register::SENS_AVG,     SENS_AVG_BIT::Measurement_range_1000_set, SENS_AVG_BIT::Measurement_range_1000_clear | SENS_AVG_BIT::Filter_Size_Variable_B },
		{ Register::GPIO_CTRL,    GPIO_CTRL_BIT::GPIO2_DIRECTION | GPIO_CTRL_BIT::GPIO1_DIRECTION, 0},
	};
};