Linker Script implementation notes and policy

LLD implements a large subset of the GNU ld linker script notation. The LLD implementation policy is to implement linker script features as they are documented in the ld manual We consider it a bug if the lld implementation does not agree with the manual and it is not mentioned in the exceptions below.

The ld manual is not a complete specification, and is not sufficient to build an implementation. In particular some features are only defined by the implementation and have changed over time.

The lld implementation policy for properties of linker scripts that are not defined by the documentation is to follow the GNU ld implementation wherever possible. We reserve the right to make different implementation choices where it is appropriate for LLD. Intentional deviations will be documented in this file.

Symbol assignment

A symbol assignment looks like:

symbol = expression;
symbol += expression;

The first form defines symbol. If symbol is already defined, it will be overridden. The other form requires symbol to be already defined.

For a simple assignment like alias = aliasee;, the st_type field is copied from the original symbol. Any arithmetic operation (e.g. + 0 will reset st_type to STT_NOTYPE.

The st_size field is set to 0.

Output section description

The description of an output section looks like:

section [address] [(type)] : [AT(lma)] [ALIGN(section_align)] [SUBALIGN](subsection_align)] {
  output-section-command
  ...
} [>region] [AT>lma_region] [:phdr ...] [=fillexp] [,]

Output section address

When an OutputSection S has address, LLD will set sh_addr to address.

The ELF specification says:

> The value of sh_addr must be congruent to 0, modulo the value of sh_addralign.

The presence of address can cause the condition unsatisfied. LLD will warn. GNU ld from Binutils 2.35 onwards will reduce sh_addralign so that sh_addr=0 (modulo sh_addralign).

Output section alignment

sh_addralign of an OutputSection S is the maximum of ALIGN(section_align) and the maximum alignment of the input sections in S.

When an OutputSection S has both address and ALIGN(section_align), GNU ld will set sh_addralign to ALIGN(section_align).

Output section LMA

A load address (LMA) can be specified by AT(lma) or AT>lma_region.

• AT(lma) specifies the exact load address. If the linker script does not have a PHDRS command, then a new loadable segment will be generated.
• AT>lma_region specifies the LMA region. The lack of AT>lma_region means the default region is used. Note, GNU ld propagates the previous LMA memory region when address is not specified. The LMA is set to the current location of the memory region aligned to the section alignment. If the linker script does not have a PHDRS command, then if lma_region is different from the lma_region for the previous OutputSection a new loadable segment will be generated.

The two keywords cannot be specified at the same time.

If neither AT(lma) nor AT>lma_region is specified:

• If the previous section is also in the default LMA region, and the two section have the same memory regions, the difference between the LMA and the VMA is computed to be the same as the previous difference.
• Otherwise, the LMA is set to the VMA.